How To Prevent Condensation On Your Windows

how to prevent condensation on your windows

Condensation forms on the inside of windows when warm, moist air inside the home meets glass that is colder than the air’s dew point, and it is most common on winter mornings in bedrooms, kitchens and bathrooms. Most of it can be cut by reducing moisture and improving ventilation: open trickle vents, use extractor fans, dry washing outside or in a ventilated room with the door closed, and keep the heating at a steady, low level. Condensation between the two panes of a double-glazed unit is different – it means the unit’s seal has failed and the unit needs replacing.

Double glazing greatly reduces condensation compared with single glazing, because the inner pane stays warmer. It does not make windows immune, though, and older, poorly fitted or failed units can make the problem worse. The sections below cover why condensation happens, how to get rid of it, how to deal with it room by room, and what to do about black mould.

Why does window condensation happen?

Condensation forms when warm, moist air meets a cold surface. Warm air can hold more water vapour than cold air, so when it touches something colder – a window, an outside wall or a mirror – it cools down, can no longer hold all of its moisture, and the excess turns back into water droplets on that surface. The temperature at which this happens is called the dew point.

The following household activities generate the most moisture:

  • Cooking – Boiling, steaming and simmering all release water vapour, as does boiling the kettle.
  • Showering and bathing – Hot showers and baths fill the air with water vapour, which condenses on the coldest surfaces in the room, such as windows, tiles and mirrors.
  • Laundry – Drying clothes indoors releases a lot of moisture into the air, and the warmer the room, the faster it evaporates.
  • Dishwashing – Hot water in sinks and dishwashers releases vapour into the air, and steam escapes when the dishwasher is opened at the end of a cycle.

 

How to get rid of condensation on windows: 8 quick steps

  1. Wipe the glass and sills dry every morning with a cloth or window vacuum, and wring the cloth out outside or in the sink rather than leaving it on a radiator.
  2. Open trickle vents and leave them open, or open a window slightly for 10 to 15 minutes each morning.
  3. Close the kitchen or bathroom door when cooking or bathing, and open a window in that room.
  4. Run extractor fans while cooking or showering and leave them on for around 20 minutes afterwards.
  5. Put lids on pans and use the smallest amount of water needed.
  6. Dry washing outdoors where possible, or indoors in one room with a window open and the door closed.
  7. Keep the heating at a steady, low level rather than letting rooms get very cold and then heating them quickly.
  8. Keep furniture slightly away from outside walls and windows, and do not block air bricks, vents or radiators.

 

If condensation is still heavy every day after these steps, a dehumidifier or a mechanical ventilation system, both covered below, is the next step. If the condensation is between the panes of glass, none of these will help, and the sealed unit needs replacing.

How do I stop condensation on windows?

There are several ways to reduce condensation on windows, from upgrading the glazing to changing everyday routines.

Upgrade your double-glazed windows

The gap between the panes of a double-glazed window insulates the inner pane from the cold outside, so it stays warmer and attracts less condensation. If a home already has double glazing but condensation is still heavy, one of these may be the reason:

  • Lower-quality glazing – A window’s energy rating shows how well it insulates. The better the insulation, the warmer the inner pane and the less condensation forms on it. Older or lower-rated windows may be worth upgrading to higher-rated ones.
  • Loss of insulation – When the seal around a double-glazed unit fails, the dry air or insulating gas between the panes is gradually replaced by damp air, and it cannot be put back. The inner pane then runs colder and attracts more condensation. In these cases, the only way to restore the window’s performance is to replace the sealed unit – see resealing and replacing double-glazed units.
  • Poor frames – The frame insulates the edge of the window as well as holding the glass. Damaged, poorly fitted or low-quality frames let cold in around the glass, which leaves cold spots where condensation forms.

 

Improve ventilation

Ventilation replaces warm, humid air with drier, fresh air. Consider the following:

  • Open windows regularly – Opening windows on opposite sides of the home for 10 to 15 minutes a day, ideally in the morning, clears a lot of moisture quickly. The downside is some lost heat, so keep it short.
  • Trickle vents – Trickle vents are small vents built into the top of most modern double-glazed windows. Unlike opening a window, they let a steady flow of fresh air in without causing a draught or a sharp drop in room temperature. They work slowly, so they are most effective left open all the time.
  • Air bricks – Air bricks are perforated bricks or vents set into external walls to provide background ventilation, including under suspended timber floors. Keep them clear of soil, plants and debris, and never block them.
  • Mechanical ventilation systems – There are two main types. Positive input ventilation (PIV) blows filtered air into the home, usually from the loft, which dilutes humid air and pushes it out through gaps and vents. Mechanical ventilation with heat recovery (MVHR) extracts damp air from kitchens and bathrooms and supplies fresh air, recovering most of the heat in the process.
  • Internal doors – Close the kitchen or bathroom door while cooking or bathing, so moisture does not spread to colder rooms where it will condense. At other times, leaving internal doors open helps warm air circulate.
  • Use an extractor fan in kitchens and bathrooms – Run extractor fans while cooking, showering or using any appliance that adds moisture to the air, and leave them on for around 20 minutes afterwards.
  • Avoid blocking vents and radiators – Vents and radiators blocked by furniture, curtains or dirt reduce air circulation and leave cold, damp spots where moisture builds up.
  • Use a dehumidifier – A dehumidifier draws in moist air, removes the water and collects it in a tank, lowering the humidity in the room.

 

Cloth drying routine

How clothes are dried makes a big difference to the amount of moisture in the air. Drying clothes indoors releases their moisture into the room, which raises the humidity and makes window condensation more likely.

These changes help:

  • Tumble dryer ventilation – A tumble dryer releases a lot of moisture. If it is not vented outside, keep the room ventilated while it runs, with an extractor fan or an open window.
  • Vented or condenser tumble dryer – A vented tumble dryer connected to an outside vent expels the moisture outdoors, and a condenser or heat pump dryer collects it in a tank. Both put far less moisture into the room than drying clothes on airers or radiators.
  • Dry clothes outdoors – Drying clothes outside whenever the weather allows keeps that moisture out of the home altogether.

 

Window condensation in different areas of the home

Condensation behaves differently from room to room. These are the most common problem areas.

Why do bedroom windows have excess moisture in the morning?

There are several reasons, some of which may be surprising:

  • Breathing – Each person breathes out a significant amount of water vapour overnight, and in a closed bedroom it has nowhere to go.
  • Lack of ventilation – Most people keep bedroom windows and doors shut at night to stay warm, which traps that moisture in the room. As humidity rises, condensation on the windows becomes almost certain.
  • Temperature drop – When the heating goes off or down overnight, the glass cools further and reaches the dew point of the humid air more easily.

 

Solutions include:

  • Heating – Keeping the heating on at a low, steady level overnight keeps the glass warmer and reduces the temperature swing that causes condensation.
  • Dehumidifier – If cold glass cannot be avoided, a dehumidifier removes moisture from the air so less of it condenses.
  • Air vents – Open the window’s trickle vents to keep air circulating while keeping most of the heat in.

 

How do you reduce condensation in living rooms and common areas?

Swings in temperature, combined with poor air circulation, cause most condensation in living rooms. Common solutions include:

  • Glazed windows – Double or triple-glazed windows keep the inner pane warmer, which stops condensation forming, and they also reduce outside noise and heat loss.
  • Window frames – Keep furniture and heavy curtains a short distance away from windows and frames, so air can circulate and moisture does not get trapped.
  • Loft insulation – Good loft insulation keeps the whole home warmer and the temperature steadier, which reduces cold surfaces.

 

How do you prevent condensation on wooden window frames?

Wooden frames are at risk from condensation in two ways: the water itself, and the rot it causes once moisture gets into the timber. The best ways to protect them are:

  • Protective finish – Keep timber frames painted or stained with a microporous exterior paint or stain, which keeps water out while letting the wood breathe. Repaint or re-stain as the manufacturer recommends, and touch up any chips or cracks quickly.
  • Improve ventilation – Keep wooden frames dry by ventilating the room, either by opening windows briefly or by keeping trickle vents open.
  • Reduce indoor moisture sources – This can be difficult with wooden frames in bathrooms or kitchens, so ventilate well while cooking or bathing and wipe the frames dry afterwards.

 

How do you prevent condensation on aluminium window frames?

Older aluminium windows often have frames that run right through from the outside to the inside with nothing to stop the cold, so the inside of the frame gets very cold and collects condensation even when the glass stays clear. Modern aluminium windows have a thermal break – an insulating strip inside the frame – which keeps the inner face much warmer.

To reduce condensation on older aluminium frames, wipe them dry each morning, keep the room ventilated and the heating steady, and use a dehumidifier in the worst rooms. If the frames are cold, wet and stained every winter, replacing them with thermally broken aluminium or uPVC windows is the lasting fix.

How to stop black mould on window frames and seals

Black mould grows where condensation is left to sit, most often on window seals, the bottom of frames, sills and the corners of reveals. Damp and mould mainly affect the airways and lungs and can cause coughing, wheezing and shortness of breath, as well as skin and eye irritation, so it is worth dealing with quickly.

To remove small patches of mould on hard surfaces such as frames, sills and seals:

  1. Wear gloves, a mask and eye protection.
  2. Use a product made for removing mould and mildew, following its instructions. Government guidance recommends these in preference to bleach.
  3. Wipe the area clean and leave it to dry completely.
  4. Deal with the cause – the condensation feeding the mould – or it will come back.

 

Large areas of mould, mould that keeps returning after cleaning, or mould on soft materials such as curtains and carpets need more than a wipe. Rubber window seals that are deeply stained or perished may need replacing, and widespread mould is a job for a professional.

Conclusion

The best way to stop condensation on windows is to understand where the moisture comes from and when, then reduce it and ventilate. If the windows themselves are to blame – single glazing, failed sealed units or old, cold frames – new double glazing will make the biggest difference. Ultra-Seal makes and fits double-glazed windows on the Wirral and in Liverpool and Chester. It is Certass registered, and every installation comes with a 15-year guarantee.

FAQ – Why do my windows have condensation on the inside every morning?

Overnight, warm moist air from breathing, cooking and drying clothes meets glass that has cooled with the outside temperature, and the moisture condenses on it. Bedrooms are usually worst because doors stay shut and moisture builds up for hours. Opening trickle vents and keeping a steady, low heat overnight both reduce it.

FAQ – Is condensation on windows a sign of a problem?

A little condensation on cold mornings is normal and is not a fault with the window. Heavy condensation that runs onto the sills every day points to too much moisture in the home or poor ventilation, and left alone it can lead to black mould. Condensation between the two panes of double glazing is different and means the sealed unit has failed.

FAQ – Do trickle vents stop condensation?

Trickle vents reduce condensation by letting moist air out and fresh air in without opening the window. They work best left open all the time, alongside extractor fans in kitchens and bathrooms. On their own they will not cure condensation if a lot of moisture is being produced indoors.

FAQ – Will a dehumidifier stop window condensation?

A dehumidifier lowers the humidity in a room, so it usually cuts window condensation noticeably, especially in bedrooms and rooms used for drying washing. It treats the symptom rather than the cause, so good ventilation and reducing moisture at source still matter.

FAQ – How do I get rid of black mould on window seals?

Wipe small patches of mould off seals and frames with a mould spray, following the product’s instructions, then dry the area thoroughly. Tackle the condensation feeding it at the same time, or the mould will come back. Mould that keeps returning, covers a large area or has deeply stained the rubber seals may mean the seals need replacing.

FAQ – How does dry air affect condensation on windows?

Dry air reduces condensation in the home. Three things have to come together for condensation to form:

  • Warm air – Warm air can hold much more water vapour than cold air, so the warmer the air, the more moisture it can carry to a cold window.
  • Moist air – The more water vapour in the air – from cooking, washing, drying clothes and breathing – the more there is to condense.
  • Dew point – This is the temperature at which air becomes saturated and cannot hold any more moisture. If the dew point in a room is 9°C, for example, condensation will form on any surface colder than 9°C.

 

Lowering the moisture in the air lowers the dew point, so surfaces have to be much colder before condensation appears.

FAQ – What is exterior condensation and should I be concerned?

Exterior condensation is moisture on the outside of the window. It appears most often in the early morning or late evening, when the outside temperature changes around sunrise and sunset.

There is no need to worry about it. It is a sign that the windows are well insulated: the outer pane is colder than the air outside because the heat from indoors is not escaping through the glass. It clears on its own as the air warms up.

FAQ – What are the dangers of damp walls caused by window condensation?

Condensation that runs off windows onto walls and sills can lead to several problems:

  • Mould growth – Persistent moisture creates the conditions mould needs. It damages surfaces such as paint and wallpaper and can affect health, mainly the airways and lungs, with symptoms such as coughing, wheezing and shortness of breath.
  • Structural damage – Long-term damp weakens materials such as timber and plaster, and the damage gets worse the longer it is left.
  • Health risks – High humidity also creates conditions in which dust mites thrive, which can trigger allergies and asthma.
  • Peeling paint and wallpaper – Water damages finishes, causing bubbling and peeling.
  • Rotting wood – Damp conditions lead to decay in timber window frames, skirting boards and floors.
  • Higher heating costs – Damp walls lose heat more easily than dry ones, so the home costs more to heat.

 

FAQ – Why is there condensation between my double glazing?

Condensation between the panes means the seal around the double-glazed unit has failed and moist air has got into the gap. It cannot be wiped away and will not clear on its own. The usual fix is to replace the sealed unit, which keeps the existing frame.

This can happen for several reasons, each with a way to prevent it:

  • Broken or deteriorated seals – Over time, the seals on double-glazed units wear out from constant changes in temperature, cold weather and general ageing. On older windows this may simply be a sign of age. Prevention: inspect windows regularly for gaps, cracks or deterioration around the seals, and get any problems repaired quickly.
  • Poor installation – Poor fitting can cause a range of problems, including moisture between the panes. Prevention: have double glazing installed by a professional, registered installer, and check whether faulty windows are still under guarantee.
  • Damage – Impact or movement in the building can cause small fractures in the sealed unit, which spread over time and let moisture in. Prevention: avoid slamming windows or putting pressure on the glass.
  • Manufacturing defects – A sealed unit can leave the factory with a poor seal that lets moisture in slowly. Prevention: buy from a reputable manufacturer and installer that guarantees its sealed units. A window’s energy rating reflects how well it insulates, not how well the unit is sealed, so the length of the guarantee is a better guide.

 

If the panes have misted, Ultra-Seal can replace the sealed unit without replacing the whole window.

FAQ – Does the direction my windows face affect condensation?

Yes, the direction a window faces affects how much condensation it gets:

  • North-facing windows – In the UK, north-facing windows get little or no direct sunlight, so the glass stays cold all day and condensation is more likely and slower to clear. These are the windows where trickle vents matter most.
  • South-facing windows – The sun stays in the southern sky through the day, so south-facing windows get the most direct sunlight, especially in winter, and clear quickly.
  • East-facing windows – East-facing windows get the first direct sunlight of the day, in the morning, which clears overnight condensation early, but they stay cold through the afternoon and evening.
  • West-facing windows – West-facing windows are the opposite, getting direct sunlight from mid-afternoon to early evening.

 

Window vents and thermal blinds or curtains help control heat loss when the temperature drops at night. Knowing which windows are most prone to condensation, and when, makes it easier to adjust daily routines to prevent it.

FAQ – Do new windows reduce condensation?

New double-glazed windows usually reduce condensation, because the inner pane stays warmer than old single glazing or failed units, and they can be fitted with trickle vents. They will not solve condensation caused by high indoor humidity, so ventilation still matters.

Table of Contents

Click For A Free Quote